DL06 Operator Display
Ref:
D0-06LCD
Optional snap-in LCD display (D0-06LCD) for the DL06.
No need to have a laptop to get a critical piece of information in a memory register or a PLC fault message from the DL06. Program user-defined messages in ladder logic for display on the DL06 LCD message unit to show important values, events, alarms or faults. Use the LCD display as a diagnostic tool to quickly pinpoint problems..
- Two-line x 16-character display simply snaps into the face of the DL06. No cable or special mounting required!
- ESC, MENU and ENT keys, along with four arrow keys allow for easy and intuitive navigation
- Password protection capabilities available for system parameters like date and time
- Backlight can be turned off for bright locations
DL06 LCD operator display, 16 characters x 2 rows with backlight, 7 function keys. Installs into any model DL06 PLC; display single bit, 16 bit, or 32 bit I/O or V-memory registers, scan time, PLC mode, system errors, display/change clock calender or user V-memory ranges for setpoints, along with user programmable display and data entry messages. Password protection capable for clock/calendar setup and data value changes in user V-memory registers. LCD programming configured using DirectSoft32 programming software version 4.0 or later; D2-HPP LCD programming not supported. Installation and operation covered in the D0-06USER-M, ordered separately.
Data Sheet
Enquire now